走進真實的場景，感受產品的獨特魅力！我們的軟管泵-水渠機廠家直銷大量現貨視頻將帶您深入了解產品的每一個細節，讓您對其優點和特點一目了然。


以下是:軟管泵-水渠機廠家直銷大量現貨的圖文介紹

軟管泵-水渠機廠家直銷大量現貨


豫信致誠機械設備有限公司成立于2017年，坐落于風景優美、人文薈萃的——甘肅甘南。公司長期致力于【甘肅甘南混凝土拋丸機】產品的生產研發工作，公司具有良好的企業形象和品牌形象，常年參加國內外大型專業【甘肅甘南混凝土拋丸機】展。公司視質量為生命，嚴格執行各項工藝標準和操作規程，嚴格控制每一個生產流程與細節，確保質量的穩定性和【甘肅甘南混凝土拋丸機】產品的完善性。公司秉承質量、求實、求新、服務的宗旨，本著服務大眾的精神，更以優良的質量，完善的售后獲得了廣大用戶的信賴。熱忱歡迎廣大用戶光臨惠顧！



首先我們先介紹一下軟管泵，軟管泵又稱蠕動泵。為了泵體污染流體或流體污染泵體的危險性，整個泵的裝置中只有軟管與介質接觸。在一般場合下，軟管泵使用的都是天然橡膠的軟管。內層和外層都是完整光滑的天然橡膠，其目的是很強防磨損。適用于腐蝕性不高但磨損性很大的如泥漿以及無機物等等介質。而且一般適用于脂肪、油類或油脂的介質，以及有機化學物質。內層是橡膠，而外層是天然橡膠或者是復合橡膠。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.

 






工業軟管泵輸油不足的可能原因及解決方法齒輪泵故障排除10個隔油環齒輪泵應能連續供油，齒輪嚙合重疊系數應大于1。當一對齒輪未脫離嚙合時，另一對齒輪已進入嚙合狀態。這樣，當有兩對齒輪同時嚙合時，兩對齒輪的齒嚙合線之間形成一個封閉的體積，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 



點擊查看豫信致誠機械設備有限公司的【產品相冊庫】以及我們的【產品視頻庫】