想一睹蜂窩活性炭-聚合氯化鋁質檢嚴格放心品質產品的真實風采嗎?我們的現場實拍視頻將帶您親臨現場,感受產品的卓越品質和創新設計,不容錯過!
以下是:蜂窩活性炭-聚合氯化鋁質檢嚴格放心品質的圖文介紹
二是要看蜂窩活性炭產品所產生的氣泡,如果產生的氣泡越多則產品的質量就越好。我們可以做一個小實驗,將一小把蜂窩活性炭產品投入水中,由于水滲透的作用,水會隨之浸入活性炭的孔隙中,以此來讓孔隙中的空氣排出,從而產生一連串的極為小的氣泡,在水中拉出一條細小的氣泡線,同時又發出了茲茲的氣泡聲,看著十分有趣。如果這種現象發生的很劇烈的話,而且持續的時間越長,那么就證明蜂窩活性炭產品的孔隙結構非常發達,就是蜂窩活性炭的吸附性越好的表現。
The two is to look at the honeycomb activated carbon products produced by the bubble, if the bubble is more the better the quality of the product. We can do a little experiment, a handful of honeycomb activated carbon products into the water, because the water penetration effect, water will be immersed in the pores of activated carbon, so the pore in the air, resulting in a series of very small bubbles, pulled out a tiny bubbles lines in the water, at the same time also issued Zizi bubble sound, looked very interesting. If this phenomenon is very serious, and the longer the duration, then it is proved that the honeycomb activated carbon product pore structure is very developed, that is, the better adsorption performance of honeycomb activated carbon.
The two is to look at the honeycomb activated carbon products produced by the bubble, if the bubble is more the better the quality of the product. We can do a little experiment, a handful of honeycomb activated carbon products into the water, because the water penetration effect, water will be immersed in the pores of activated carbon, so the pore in the air, resulting in a series of very small bubbles, pulled out a tiny bubbles lines in the water, at the same time also issued Zizi bubble sound, looked very interesting. If this phenomenon is very serious, and the longer the duration, then it is proved that the honeycomb activated carbon product pore structure is very developed, that is, the better adsorption performance of honeycomb activated carbon.
塊狀蜂窩活性炭和粉末蜂窩活性炭哪個好?
要根據具體工藝目的結合兩種活性炭的各自優點而選用。
粉狀活性炭通常在液相應用,加入液體后經攪拌混合、過濾或沉降,而得所要的液體。以粉狀活性炭處理的優點是:適用于間歇工藝;易控制加入量;可利用現成過濾設備;價格較低。
粒狀活性炭可用于液相,也可用于氣相。一般將要處理的液體或氣體連續通過活性炭柱。以粒狀活性炭處理的特點是:適用于連續工藝與自動控制;較少活性炭耗量,使用的炭/液比高;較易清潔操作;因價較高大量使用時應予再生,且較易再生。
普邦環保材料有限公司坐落于高新技術產業開發區金梭路33號, 廠家于2009年成立.注冊資金1000萬主要是從事【河北廊坊聚合氯化鋁】的銷售 設計及生產。我們將不斷開發新【河北廊坊聚合氯化鋁】產品,應用新工藝,始終如一的注重【河北廊坊聚合氯化鋁】產品質量、售后服務與廠家形象。