豫信致誠機械設備有限公司在 黑龍江大慶混凝土拋丸機領域有豐富的生產經驗和人才、技術、管理優勢，公司匯聚了 黑龍江大慶混凝土拋丸機行業內具有高素質的專業技術員工，為用戶提供 黑龍江大慶混凝土拋丸機設計制造、安裝調試和技術操作培訓。您的滿意是我們心愿，我們秉承這一理念，不斷努力自己的軟硬件實力，為廣大新老客戶提供更可靠 黑龍江大慶混凝土拋丸機產品和服務。
單管軟管泵特點:
動力消耗少，可計量輸出；易損件少，更換時間短；獨特?zé)o密封結構，不會產生泄露；自吸能力強，可達8米；可正反向運轉，具有自清理能力；壓軸采用滾動摩擦，泵腔無需加油；結構簡單，操作維修方便；出口壓力 可達1.6Mpa；輸送高粘度、高固含量、固體顆粒、纖維物質、及其他雜志等液物料，不會產生任何堵塞。
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .
工業軟管泵輸油不足的可能原因及解決方法齒輪泵故障排除10個隔油環齒輪泵應能連續供油，齒輪嚙合重疊系數應大于1。當一對齒輪未脫離嚙合時，另一對齒輪已進入嚙合狀態。這樣，當有兩對齒輪同時嚙合時，兩對齒輪的齒嚙合線之間形成一個封閉的體積，其中部分油也被困在其中。
軟管泵屬于蠕動泵的范疇，主要是由一根特制的橡膠軟管，對應泵體內轉子總成上的一對壓輥，當壓輥沿著橡膠軟管轉動時，壓輥與泵殼產生的擠壓力將橡膠軟管壓扁，在軟管自身彈性和側導輥的強制下，通過恢復原狀產生的真空吸入流體物料，物料在壓輥的機械擠壓下從管內排出，如此往復循環，從而達到連續輸出物料的目的。
The hose pump belongs to the category of peristaltic pump. It is mainly composed of a special rubber hose corresponding to a pair of pressure rollers on the rotor assembly in the pump body. When the pressure roller rotates along the rubber hose, the pressure roller and the pump housing The squeezing force flattens the rubber hose. Under the elasticity of the hose itself and the force of the side guide rollers, the fluid material is sucked in by the vacuum generated by the original state. The material is discharged from the tube under the mechanical pressure of the pressure roller, and so on. , So as to achieve the purpose of continuous output of materials.