不要猶豫，花一分鐘時間觀看我們的軟管泵路面拋丸機誠信經營產品視頻吧！您將發現更多令人贊嘆的細節和優勢，為您的購買決策提供有力參考。


以下是:軟管泵路面拋丸機誠信經營的圖文介紹


誠信經營、品質如一、優質服務、無憂售后。工廠直銷價格合理，我們不怕貨比貨，就怕您買錯。

豫信致誠機械設備有限公司主營產品 貴州畢節混凝土拋丸機。價格以本公司實際報價為準！
所有商品我們公司在發貨之前都進行嚴格質檢，確保無任何問題才發貨！
圖片均為實物拍攝，但由于光線及顯示器等原因會有輕微的色差，請諒解。
廠家直銷 價格實惠 質量保證
保證產品的亮度和效果質量
現貨批發 量大從優 歡迎訂購。



軟管泵主要有泵殼、轉子體、減速機、機座和軟管等5大部分組成。泵的耐久性主要決定于管子的彈性和耐腐蝕性，其流量與電動機的轉速和管子內徑大小有關。

The hose pump is mainly composed of 5 parts: pump casing, rotor body, reducer, base and hose. The durability of the pump is mainly determined by the elasticity and corrosion resistance of the pipe, and its flow rate is related to the speed of the motor and the inner diameter of the pipe.





工業軟管泵輸油不足的可能原因及解決方法齒輪泵故障排除10個隔油環齒輪泵應能連續供油，齒輪嚙合重疊系數應大于1。當一對齒輪未脫離嚙合時，另一對齒輪已進入嚙合狀態。這樣，當有兩對齒輪同時嚙合時，兩對齒輪的齒嚙合線之間形成一個封閉的體積，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 


豫信致誠機械設備有限公司


點擊查看豫信致誠機械設備有限公司的【產品相冊庫】以及我們的【產品視頻庫】